The double weed brush can be attached to the (mini) loader, (mini) excavator, tractor, forklift, etc., provided the minimum oil output is 40L and the machine is equipped with a pressureless return.
The double weed brush is an innovation on the standard weed brush. The advantage of a double brush is that a larger surface area can be brushed in the same amount of time. The brushes have the same rotational direction, ensuring the debris is discharged to one side.
The double weed brush is available as a fixed or hydraulically swiveling version. By utilizing a hydraulic swivel function with the pivot point close to the vehicle, a wide swivel range is possible—70 degrees to the left and right—allowing the weed brush to extend far from the vehicle with good visibility on the brush. In case of heavy soiling, there is the option for maximum swiveling so that both brushes work one after the other, resulting in a more aggressive action and faster operation. The fixed version is suitable for attachment to a mobile excavator with a tilt-rotating head.
A second advantage is that two brushes adapt better to uneven surfaces than one large brush, as both can pivot independently.
- The diameter of the brush is 750 mm. Available with a brush made of sheet steel or steel cable.
- With two hydraulic functions, the brush can be operated.
- Weight ± 300 kg.
The double weed brush is available with the attachment parts that match your vehicle (for the attachment parts, see the document Kemp attachment parts).
For additional specifications, see the document product specifications.
Options:
Side-shift: See the last 4 photos.
Rubber flap: The rubber flap prevents the weeds from being scattered far away. The rubber flap can be adjusted to multiple positions.
Electric control: With the electric control, the rotation and swiveling can be controlled with one hydraulic function.
Joystick with magnetic base and cable: This option is necessary for electric control from the vehicle when it lacks a control function with three positions.
Ball valves: With one hydraulic function, ball valves can also be used for swiveling. By allowing the brush to rotate with the ball valves open, the brush will also swivel. Once the brush is in the correct position, close the ball valves and start brushing.
Pressureless return connection: If you expect to use the weed brush intensively, we recommend installing this option.
Overpressure/ over-run valve: If the operating pressure exceeds 225 bar, overpressure must be installed to prevent overloading. The over-run valve reduces the load on the hydraulic motor when the brush suddenly stops or its rotational direction changes.
